KIITEE 2022 Application Form(Available), Check Here | EducationAsia.in

KIITEE 2022, Kalinga Institute of Industrial Technology Entrance Examination is the all India entrance examination conducted by KIIT University, Bhubaneswar. KIIT University offered various courses like  B.Tech., M.Tech., B.Arch., B.Sc., BCA, LLB, LLM, M.Sc., Mass Communication, MCA, MBA, Ph.D., etc.  The eligibility, exam dates, and exam centers are varied according to the programs. such as Admission in MBBS, BDS, and PG Medical & PG Dental programs will be done through national level test scores of NEET and NEET PG. Interested candidates can visit the official website of the university and apply for the entrance exam.

KIITEE 2022 Registration has already started. Candidates can go through the official website to register the application form.

KIITEE 2022 Highlight:

KIIT is one of the first institutions in the State of Odisha to attract both Indian and foreign students into its various academic programs. KIIT has students from over 45 countries, including most of the South Asian Nations, proving its reputation as a quality institution of professional education that transcends borders. the KIITEE 2022 exam details are given in the table. 

KIITEE 2022 Schedule:

KIITEE 2022, Kalinga Institute of Industrial Technology Entrance Examination is the All India Entrance Examination conducted by KIIT University, Bhubaneswar. The exam is a gateway to get admission into various UG & PG engineering and law courses. the KIITEE 2022 Schedule is given below:

KIITEE 2022 Admit Card:

The admits card will be available online after the completion of the KIITEE application process. The admit card of KIITEE 2022 will be available on the official website. Successfully registered candidates can download KIITEE admit card till the exam day. KIITEE admit card is a mandatory document to be carried to the exam center. without admit card, you are not able to enter the exam hall. Candidates must note that KIITEE admits card will not be dispatched in hard copy. Candidates are advised to preserve the admit card till the admission process is over.

A highlight of Admit card schedules:
The admit card will be available online. After completing the exam the KIIT University will be declared its results online. The candidates can download the admit card after it will be available online.

Steps to download admit card of KIITEE 2022:

After the successful registration and submit the application form the admit card will be generated for the giving KIITEE 2022 entrance. admission is mandatory to give the entrance exam. Without admit card, you can't even enter the exam hall. Once when the admit card will be available online candidates can download the KIITEE Admit card by the following process.

Step.1: Go to the official website-
To download the admit card you must visit the official website of the KIITEE.  you will find all the information regarding the KIITEE 2022. 

Step.2: Click on the download admit card link-
On the official website search the admit card download link. which will be clearly visible on the website. when you find the link click on it. then the further process will take place.

Step.3: Enter Registration number and date of birth-
To download the admit card you must enter the Registration Id and Date of birth. The registration id and the date of birth must be the candidate's own. 

Step.4: download the KITEE 2022 admit card-
After successfully submit the Registration id and date of birth, the candidate's admit card will be visible on the screen. Check the details carefully and download them. Make more than 2 hard copies of this. the admit card will be further use during the counseling process.

Admit card contains:
The candidate's KIITEE 2022 admit card contains some important information. The information given in the admit card should be correct and valid. the information which is present in the admit card is given below.

1. Name of the candidates: 
The names should be the same as your 10th board certificates. in the admit card make sure that your name spelling is correct. Check all details carefully like the parent's number and naming section, the gender of the candidates, etc. the name should be the same as your 10th board certificates.

2. Application number and roll number:
the candidates' application number and roll number will be given by the university for the entrance exam. the application number and the roll number are the important things that will always be useful in this whole process of getting admission to the KIIT college.

3. Categories and Course name:
the categories of the candidates also are mention on the admit cards. KIITEE 2022 will provides various courses so the candidate's syllabus and questions depend on its course. the course also is mention by the admit card.

4. Date of birth:
The KIITEE 2022 admit card mention of the date of birth is also very important. The date of birth must be the same as your 10th board certificates. The date of birth is taken as a password too.

5. Date and time of exam with exam center:
one of the most important things mentioned in the admit card is the exam center with the date and time. the exam will be taken up in the various centers. so it is necessary to mention the exam center in the admit card. the candidate's exam dates and exam center are also different according to their roll number and application number. 

6. Roll number:
without the roll number, you are unable to take part in the entrance exam. when you reach the exam center it's your duty to search your roll number. With the help of roll number when you need any information regarding the KIITEE you can easily be found. 

7. Instruction regarding the exam:
Some of the important instruction is given below

• Its most are the same as your 10th board certificates
• Candidates should not forget to carry the admit card along with an ID proof and photograph to the exam center.
• Candidates should reach the exam center at least 45 minutes before the exam.
• Candidates should not carry a calculator, electronics watch, slide rule, log table, printed or written material, mobile phone, pager or any other device inside the exam hall.
• Candidates should not leave their seats before the completion of the exam is announced by the proctor.
• Candidates should give the test at the allotted seat only. The official website informs, “The VI. candidature of a candidate, found to have changed hall or seat on his/her own, shall be canceled and no plea would be accepted.”
• Candidates are not allowed to leave their seats without the permission of the proctor.
• Smoking is strictly prohibited inside the exam hall.
• Candidates are not allowed to have tea, coffee, cold drinks or snacks inside the exam hall.
• Candidates are not allowed to have tea, coffee, cold drinks or snacks inside the exam hall 

KIITEE 2022 Syllabus:

The students appearing for the KIITEE 2022 entrance exam are advised to go through the syllabus thoroughly before starting their preparation for the exam. Candidates must have also knowledge about KIITEE Pattern and KIITEE schedules. The exam will mostly cover the subjects from Physics, Chemistry, Mathematics. The students can get the detailed syllabus below -

Physics:

Unit 1: Units and Measurement
Units for measurement, system of units-S.I., fundamental and derived units. Dimensions and their applications

Unit 2: Description of Motion in One Dimension
Motion in a straight line, uniform and non-uniform motion, their graphical representation. Uniformly accelerated motion, and its application.

Unit 3: Description of Motion in Two and Three Dimensions
Scalars and vectors, vector addition, a real number, zero vector and its properties. Resolution of vectors. Scalar and vector products, uniform circular motion and its applications projectile motion.

Unit 4: Laws of Motion
Force and inertia Newton’s Laws of Motion. Conservation of linear momentum and its applications, rocket propulsion, friction-laws of friction.

Unit 5: Work, Energy and Power
Concept of work, energy and power. EnergyKinetic and potential. Conservation of energy and its applications, Elastic collisions in one and two dimensions. Different forms of energy

Unit 6: Rotational Motion and Moment of Inertia
Centre of a mass of a two-particle system. Centre of a mass of a rigid body, general motion of a rigid body, nature of rotational motion, torque, angular momentum, its conservation and applications. Moment of inertia, parallel and perpendicular axes theorem, expression of a moment of inertia for the ring, disc and sphere.

Unit 7: Gravitation
Acceleration due to gravity, one and two-dimensional motion under gravity. The universal law of gravitation, variation in the acceleration due to the gravity of the earth. Planetary motion, Kepler’s laws, artificial satellite-geostationary satellite, gravitational potential energy near the surface of the earth, gravitational potential and escape velocity.

Unit 8: Solids and Fluids
Inter-atomic and Inter-molecular forces, states of matter.

• Solids: Elastic properties, Hook’s law, Young’s modulus, bulk modulus, modulus of rigidity.
• Liquids: Cohesion and adhesion. Surface energy and surface tension. The flow of fluids, Bernoulli’s theorem and its applications. Viscosity, Stoke’s Law, terminal velocity.

Unit 9: Oscillations
Periodic motion, simple harmonic motion and its equation of motion, energy in S.H.M., Oscillations of a spring and simple pendulum.

Unit 10: Waves
Wave motion, speed of a wave, longitudinal and transverse waves, superposition of waves, progressive and standing waves, free and forced Oscillations, resonance, a vibration of strings and air columns, beats, Doppler effects.

Unit 11: Heat and Thermodynamics
Thermal expansion of solids, liquids and gases and their specific heats, Relationship between Cp and Cv for gases, the first law of thermodynamics, thermodynamic processes. The second law of thermodynamics, Carnot cycle efficiency of heat engines.

Unit 12: Transference of Heat
Modes of transference of heat. Thermal conductivity. Black body radiations, Kirchoff’s Law, Wien’s law, Stefan’s law of radiation and Newton’s law of cooling.

Unit 13: Electrostatics
Electric charge-its unit and conservation, Coulomb’s law, dielectric constant, electric field, lines of force, field due to dipole and its behaviour in a uniform electric field, electric flux, Gauss’s theorem and its applications. Electric potential, potential due to a point charge. Conductors and insulators, distribution of charge on conductors. Capacitance, parallel plate capacitor, the combination of capacitors, the energy of the capacitor.

Unit 14: Current Electricity
Electric current and its unit, sources of energy, cells-primary and secondary, a grouping of cells resistance of different materials, temperature dependence, specific resistivity, Ohm’s law, Kirchoff’s law, series and parallel circuits. Wheatstone Bridge with their applications and potentiometer with their applications.

Unit 15: Thermal and Chemical Effects of Currents
Heating effects of current, electric power, the simple concept of thermo-electricity- Seeback effect and thermocouple, Chemical effect of currentFaraday’s laws of electrolysis

Unit 16: Magnetic Effects of Currents
Oersted’s experiment, Bio-Savert’s law, magnetic field due to straight wire, circular loop and solenoid, force on a moving charge in a uniform magnetic field ( Lorentz force), force and torques on currents in a magnetic field, force between two current-carrying wires, moving coil galvanometer and conversion to ammeter and voltmeter.

Unit 17: Magneto Statics
Bar magnet, magnetic field, lines of force, torque on a bar magnet in a magnetic field, earth’s magnetic field, para, dia and ferromagnetism, magnetic induction, magnetic susceptibility.

Unit 18: Electromagnetic Induction and Alternating Currents
Induced e.m.f., Faraday’s Law, Lenz’s Law, Self and Mutual Inductance, alternating currents, impedance and reactance, power in a.c. Circuits with L.C. And R Series Combination, resonant circuits. Transformer and A.C. generator.

Unit 19: Ray Optics
Reflection and refraction of light at plane and curved surfaces, total internal reflection, optical fibre; deviation and dispersion of light by a prism; Lens formula, magnification and resolving power, microscope and telescope.

Unit 20: Wave Optics
Wave nature of light; Interference- Young’s double-slit experiment. Diffraction-diffraction due to a single slit. Elementary idea of polarization.

Unit 21: Electromagnetic Waves
Electromagnetic waves and their characteristics, Electromagnetic wave spectrum from gamma to radio waves-propagation of EM waves in the atmosphere.

Unit 22: Electron and Photons
Charge on an electron, e/m for an electron, photoelectric effect and Einstein’s equation of photoelectric effect.

Unit 23: Atoms, Molecules and Nuclei
Alpha particles scattering experiment, Atomic masses, size of the nucleus; radioactivity; Alpha, beta and gamma particles/rays and their properties, radioactive decay law, half-life and mean the life of radioactive nuclei, binding energy, mass-energy relationship, nuclear fission and nuclear fusion.

Unit 24: Solids and Semi-Conductors Devices
Energy bands in solids, conductors, insulators and semiconductors, PN junction, diodes, diode as rectifier, transistor action, transistor as an amplifier.

Chemistry:

Unit 1: Some Basic Concepts
Measurement in chemistry (Precision, significant figures, S.I. units, Dimensional analysis). Laws of chemical combination. Atomic Mass, Molecular Mass, mole concept, Molar Mass, determination of Molecular formula. Chemical equation, the stoichiometry of Chemical reactions.

Unit 2: States of Matter
Gaseous state, measurable properties of gases, Boyle’s Law, Charle’s Law and absolute scale of temperature, Avogadro’s hypothesis, ideal gas equation, Dalton’s law of partial pressures.
Kinetic molecular theory of gases (the microscopic model of gas), deviation from ideal behaviour.
The solid state (classification of solids, X-ray studies of crystal lattices and unit cells, packing of constituent particles in crystals). Imperfection in solids, electrical, magnetic and dielectic properties of solids. Liquid state (Properties of liquids, Vapour pressure, Surface tension, Viscosity).

Unit 3: Atomic Structure
Constituents of the atom (discovery of electron, rutherford model of the atom). Electronics structure of atoms-nature of light and electromagnetic waves, atomic spectra, bohr’s model of hydrogen, shortcomings of the bohr model. Dual nature of matter and radiation. de-Broglie relation. The uncertainty principle, Quantum Mechanical Model of the atom, Orbitals and Quantum numbers. Shapes of orbitals. Aufbau principle, Pauli Exclusion principle, Hund’s Rule, Electronics Configuration of atoms.

Unit 4: Solutions
Types of solutions, Units of concentration, Vapour-pressure of solutions and Raoult’s law. Colligative properties. Determination of molecular mass. Non-ideal solutions and abnormal molecular masses. Volumetric analysis-concentration unit.

Unit 5: Chemical Energetics and Thermodynamics
Energy changes during a chemical reaction, Internal energy and Enthalpy, Internal energy and Enthalpy changes, Origin of Enthalpy change in a reaction, Hess’s Law of constant heat summation, numericals based on these concepts. Enthalpies of reactions (Enthalpy of neutralization, Enthalpy of combustion, Enthalpy of fusion and vaporization).
Sources of energy (conservation of energy sources and identification of alternative sources, pollution associated with consumption of fuels. The sun as the primary source).
First law of thermodynamics; Relation between Internal energy and Enthalpy, application of first law of thermodynamics. Second law of thermodynamics: Entropy, Gibbs energy, Spontaneity of a chemical reaction, Gibbs energy change and chemical equilibrium, Gibbs energy available for useful work.

Unit 6: Chemical Equilibrium
Equilibria involving physical changes (solidliquid, liquid-gas equilibrium involving dissolution of solids in liquids, gases in liquids, general characteristics of equilibrium involving physical processes)
Equilibria involving chemical systems (the law of chemical equilibrium, the magnitude of the equilibrium constant, numerical problems).
Effect of changing conditions of systems at equilibrium (change of concentration, change of temperature, effect of catalyst-Le Chateliar’s principle).
Equilibria involving ions- ionization of electrolytes, weak and strong electrolytes, acidbase equilibrium, various concepts of acids and bases, ionization of water, pH scale, solubility product, numericals based on these concepts.

Unit 7: Redox Reactions and Electrochemistry
Oxidation and reduction as an electron transfer concept. Redox reactions in aqueous solutionselectrochemical cells. e.m.f. of a galvanic cell. Dependence of e.m.f. on concentration and temperature (NERNST). equation and numerical problems based on it .Electrolysis, Oxidation number (rules for assigning oxidation number, redox reactions in terms of oxidation number, nomenclature). Balancing of oxidation-reduction equations.
Electrolytic conduction. Molar conductivity, Kohlrausch’s Law and its applications, Voltaic cell, Electrode potential and Electromotive force, Gibb’s energy change and cell potential. Electrode potential and products of electrolysis, Fuel cells, corrosion and its prevention.

Unit 8: Rates of Chemical Reactions and Chemical Kinetics
Rate of reaction, Instantaneous rate of reaction and order of reaction. Factors affecting rates of reactions- factors affecting rate of collisions encountered between the reactant molecules, effect of temperature on the reaction rate, concept of activation energy catalyst. Effect of light of rates of reactions. Elementary reactions as steps to more complex reactions. How fast are chemical reactions?
Rate law expression. Order of a reaction (with suitable examples).Units of rates and specific rate constant. Order of reaction and effect of concentration (study will be confined to first order only). Temperature dependence of rate constant – Fast reactions (only elementary idea). Mechanism of reaction (only elementary idea). Photochemical reactions.

Unit 9: Surface Chemistry
Surface: Adsorption – physical and chemical adsorption, adsorption isotherms.
Colloids-Preparation and general properties, Emulsions, Micelles.
Catalysis: Homogeneous and heterogeneous, the structure of catalyst, Enzymes, Zeolites.

Unit 10: Chemical Families Periodic Properties
Modern periodic law, Types of elements – Representatives elements (s & p block, Transition elements – d-block elements, inner transition elements-f-block elements. Periodic trends in properties-ionization enthalpy, electron gain enthalpy, atomic radii, valence, periodicity in properties of compounds).

Unit 11: Chemical Bonding and Molecular Structure
Chemical bonds and Lewis structure, shapes of molecules ( VSEPR theory), Quantum theory of the covalent bond, hydrogen and some other simple molecules, carbon compounds, hybridization, Boron and Beryllium compounds.
A coordinate covalent bond, ionic bond as an extreme case of a polar covalent bond, ionic character of molecules and polar molecules. Bonding in solid-state ionic, molecular and covalent solids, metals. Hydrogen bond, Resonance.
Molecules: Molecular orbital. Theory-bond order and magnetic properties of H2,O2,N2,F2 on the basis of MOT. Hybridisation involving s, p and d orbitals (including shapes of simple organic molecules), Dipole moment and structure of molecules

Unit 12: Chemistry of Non-Metals - 1
Hydrogen (unique position in the periodic table, occurrence, isotopes, properties, reactions and uses), Hydrides-molecular, soline and interstitial
Oxygen (occurrence, preparation, properties and reactions, uses),simple oxides; ozone
Water and hydrogen peroxide, structure of water molecule and its aggregates, physical and chemical properties of water, hard and soft water, water softening, hydrogen peroxidepreparation, properties, structure and uses.
Nitrogen- Preparation, properties, uses, compounds of Nitrogen-Ammonia, Oxides of Nitrogen, Nitric Acid-preparation, properties and uses.

Unit 13: Chemistry of Non-metals-II
Boron-occurrence, isolation, physical and chemical properties, borax and boric acid, uses of boron and its compounds.
Carbon, inorganic compounds of carbon-oxides, halides, carbides, elemental carbon.
Silicon- occurrence, preparation and properties, oxides and oxyacids of phosphorus, chemical fertilizers.
Sulphur – occurrence and extraction, properties and reactions, oxides, Sulphuric acid – preparation, properties and uses, sodium thiosulphate.
Halogens- occurrence, preparation, properties, hydrogen halides, uses of halogens.
Noble gases- discovery, occurrence and isolation, physical properties, the chemistry of noble gases and their uses.

Unit 14: Chemistry of Lighter Metals
Sodium and Potassium- occurrence and extraction, properties and uses. Important compounds-NaCl, Na2CO3, NaHCO3, NaOH, KCI, KOH.
Magnesium and calcium-occurrence and extraction, properties and uses. Important compounds Mgcl2, MgSO4, CaO, Ca(OH)2, CaCO3, CaSO4, Plaster of paris, Bleaching Powder.
Aluminium – occurrence, extraction properties and uses, compounds-AlCI3, alums.
Cement. Biological role of Sodium, Potassium, Magnesium and Calcium.

Unit 15:- Heavy Metals
Iron – Occurrence and extraction, compounds of iron, oxides, halides, sulphides, sulphate, alloy and steel.
Copper and Silver- occurrence and extraction, properties and uses, compounds-sulphides, halides and sulphates, photography.
Zinc and Mercury- occurrence and extraction, properties and uses, compounds-oxides, halides; sulphides and sulphates.
Tin and Lead- occurrence and extraction, properties and uses, compounds-oxides, sulphides, halides.

Unit 16: Chemistry of Representative Elements
Periodic properties- Trends in groups and periods (a) Oxides-nature (b) Halides-melting points (c) Carbonates and sulphates-solubility.
The chemistry of s and p block elements, electronics configuration, general characteristic properties and oxidation states of the following:-
Group 1 elements - Alkali metals
Group 2 elements - Alkaline earth metals
Group 13 elements - Boron family
Group 14 elements - Carbon family
Group 15 elements - Nitrogen family
Group 16 elements - Oxygen family
Group 17 elements - Halogen family
Group 18 elements - Noble gases & Hydrogen

Unit 17: Transition Metals Including Lanthanides
Electronic configuration: General characteristic properties, oxidation states of transition metals. First-row transition metals and general properties of their compounds-oxides, halides and sulphides.
General properties of a second and third-row transition elements (Groupwise discussion).
Preparation and reactions, properties and uses of Potassium dichromate Potassium permanganate.
Inner Transition Elements: General discussion with special reference to oxidation states and lanthanide contraction

Unit 18: Coordination Chemistry and Organo Metallics
Coordination compounds, Nomenclature: Isomerism in coordination compounds; Bonding 16 in coordination compounds, Werner’s coordination theory. Applications of coordination compounds.

Unit 19: Nuclear Chemistry
Nature of radiation from radioactive substances. Nuclear reactions; Radio-active disintegration series; Artificial transmutation of elements; Nuclear fission and Nuclear fusion: Isotopes and their applications: Radio carbon-dating.

Unit 20: Purification and Characterisation of Organic Compounds
Purification (crystallization, sublimation, distillation, differential extraction, chromatography).
Qualitative analysis, detection of nitrogen, sulphur, phosphorus and halogens.
Quantitative analysis- estimation of carbon, hydrogen, nitrogen, halogens, sulphur, phosphorus ( basic principles only)
Determination of molecular mass-Silver salt method, cholroplatinate salt method
Calculation of empirical formula and molecular formula.
Numerical problems in organic quantitative analysis, modern methods of structure elucidation.

Unit 21: Some Basic Principles
Classification of Organic Compounds.
Tetravalency of Carbon, Homologous series. Functional groups- - C=C-,-C C-, and groups containing halogen, oxygen, nitrogen and sulphur. General introduction to naming organic compounds-Common names and IUPAC nomenclature of aliphatic, aromatic and Cyclic Compounds. Illustration with examples of Compounds having not more than three same or different functional groups/ atoms. IsomerismStructural and stereoisomerism (geometrical and optical). Chirality-Isomerism in Compounds having one and two chiral Centres. Enantiomers, diastereoisomers, recemic forms, racemisation & resolution. Covalent bond fission-Homolytic and Heterolytic: free radicals carbocations and carbanions. Stability of Carbocations and free-radicals. Electrophiles and Nucleophiles. Electron displacement in a covalent bone inductive effect, electromeric effect, resonance Common types of organic reactions substitutions, addition, elimination and rearrangement reactions. Illustration with examples.

Unit 22: Hydrocarbons
Classification. Sources of hydrocarbons:
Alkanes- General methods of preparation (from unsaturated hydrocarbons, alkyl halides, aldehydes, ketones and carboxylic acids). Physical properties and reactions (Substitution), Oxidation and miscellaneous). Conformations of alkanes (ethane, propane-butane) and cyclohexane, sawhorse and Newman projections)-mechanism of halogenation of alkanes.
Alkanes and Alkynes- General methods of preparation physical properties, Chemical reactions-Mechanism of electrophilic addition reactions in alkenes-Markowni Koff’s Rule, peroxide effect. Acidic character of alkynes. The polymerisation of alkenes.
Aromatic hydrocarbons- Benzene and its homologues, Isomerism, Chemical reactions of benzene. Structure of benzene, resonance. Directive influence of substituents.
Petroleum – Hydro Carbons from Petroleum, Cracking and reforming, quality of gasoline octane number, gasoline additives.

Unit 23: Organic Compound Containing Halogens
(Haloalkanes and Haloarenes) Methods of preparation, physical properties and reactions. Preparation, properties and uses of Chloroform and lodoform.

Unit 24: Organic Compounds Containing Oxygen
General methods of preparation, correlation of physical properties with their structures, chemical properties and uses of Alcohols, polyhydric alcohols, Ethers, aldehydes, ketones, 17 carboxylic acids and their derivatives, Phenol, Benzaldehyde and Benzoic acid -their important methods of preparation and reactions. The acidity of carboxylic acids and phenol effect of substituents on the acidity of carboxylic acids.

Unit 25: Organic Compounds Containing Nitrogen
(Cyanides, isocyanides, nitrogen compounds and amines)
Nomenclature and classification of amines, cyanides, isocyanides, nitro compounds and their methods of preparation; correlation of their physical properties with structure, chemical reactions and uses- Basicity of amines.

Unit 26: Synthetic and Natural Polymers
Classification of Polymers, natural and synthetic polymers (with stress on their general methods of preparation) and important uses of the following.
Teflon, PVC, Polystyrene, Nylon-66, terylene, Bakelite)

Unit 27: Bio-Molecules and Biological Processes
The Cell and Energy Cycle
Carbohydrates: Monosaccharides, Disaccharides, Polysaccharides
Amino acids and Peptides- Structure and classification.
Proteins and Enzymes-Structure of Proteins, Role of enzymes.
Nucleic Acids-DNA and RNA
Biological functions of Nucleic acids-Protein synthesis and replication.
Lipids – Structure, membranes and their functions.

Unit 28: Chemistry In Action
Dyes, Chemicals in medicines (antipyretic, analgesic, antibiotics & tranquilisers), Rocket propellants.
( Structural formulae non-evaluative)

Unit 29: Environmental Chemistry
Environmental pollutants; soil, water and air pollution; major atmospheric pollutants; acid rain, Ozone and its reactions causing ozone layer depletion, effects of the depletion of the ozone layer, industrial air pollution.

Mathematics:

Unit 1:- Sets, Relations and Functions
Sets and their Representations, Union, intersection and complements of sets, and their algebraic properties, Relations, equivalence relations, mappings, one-one, into and onto mappings, composition of mappings.

Unit 2: Complex Numbers
Complex numbers in the form a+ib and their representation in a plane. Argand diagram. Algebra of complex numbers, Modulus and Argument (or amplitude) of a complex number, square root of a complex number. Cube roots of unity, triangle inequality.

Unit 3: Matrices and Determinants 
Determinants and matrices of order two and three, properties of determinants, Evaluation of determinants. Area of triangles using determinants; Addition and multiplication of matrices, adjoint and inverse of the matrix. Test of consistency and solution of simultaneous linear equations using determinants and matrices.

Unit 4: Quadratic Equations
Quadratic equations in real and complex number system and their solutions. Relation between roots and co-efficients, nature of roots, formation of quadratic equations with given roots; Symmetric functions of roots, equations 18 reducible to quadratic equations-application to practical problems.

Unit 5 : Permutations and Combinations
Fundamental principle of counting; Permutation as an arrangement and combination as selection, Meaning of P (n,r) and C (n,r). Simple applications.

Unit 6: Binomial Theorem and Its Applications
Binomial Theorem for a positive integral index; general term and middle term; Binomial
Theorem for any index. Properties of Binomial Co-efficients. Simple applications for approximations.

Unit 7: Sequences and Series
Arithmetic, Geometric and Harmonic progressions. Insertion of Arithmetic Geometric and Harmonic means between two given numbers. Relation Between A.M., G.M. and H.M. Special series: Sn, Sn2, Sn3 . ArithmeticoGeometric Series, Exponential and Logarithmic series.

Unit 8: Differential Calculus 
Polynomials, rational, trigonometric, logarithmic and exponential functions, Inverse functions. Graphs of simple functions. Limits, Continuity; differentiation of the sum, difference, product and quotient of two functions: differentiation of trigonometric, inverse trigonometric, logarithmic, exponential, composite and implicit functions; derivatives of order up to two. Applications of derivatives: Rate of change of quantities, monotonic-increasing and decreasing functions, Maxima and minima of functions of one variable, tangents and normals, Rolle’s and Lagrange’s Mean Value Theorems.

Unit 9:- Integral Calculus
Integral as an anti-derivative. Fundamental integrals involving algebraic, trigonometric, exponential and logarithmic functions. Integration by substitution, by parts and partial fractions. Integration using trigonometric identities. Integral as limit of a sum. Properties of definite integrals. Evaluation of definite integrals; Determining areas of the regions bounded by simple curves.

Unit 10:- Differential Equations
Ordinary differential equations, their order and degree. Formation of differential equations. A solution of differential equations by the method of separation of variables. The solution of homogeneous and linear differential equations, and those of the type
d2y/dx2 = f(x)

Unit 12:- Two Dimensional Geometry
Recall of Cartesian system of rectangular coordinates in a plane, distance formula, area of a triangle, condition of the collinearity of three points and section formula, centroid and incentre of a triangle, locus and its equation, translation of axes, slope of a line, parallel and perpendicular lines, intercepts of a line on the coordinate axes.
The straight line and pair of straight lines
Various forms of equations of a line, intersection of line, angles between two lines, conditions for concurrence of three lines, distance of a point from a line Equations of internal and external bisectors of angles between two lines, coordinates of centroid, orthocenter and circumcentre of a triangle, equation of family of lines passing through the point of intersection of two lines, homogeneous equation of second degree in x and y, angle between pair of lines through the origin, combined equation of the bisectors of the angles between a pair of lines, condition for the general second-degree equation to a represent a pair of lines, point of intersection and angle between two lines.
Circles and Family of Circles
Standard form of equation of a circle, general form of the equation of a circle, its radius and centre, equation of a circle in the parametric form, equation of a circle when the endpoints of a diameter are given, points of intersection of a 19 line and a circle with the centre at the origin and conditions for a line to be tangent to the circle, length of the tangent, equation of the tangent, equation of a family of circles through the intersection of two circles, condition for two intersecting circles to be orthogonal.
Conic Sections
Sections of cones, equations of conic sections (parabola, ellipse and hyperbola) in standard forms, condition for y = mx+c to be a tangent and point (s) of tangency

Unit 13: Three Dimensional Geometry
Coordinates of a point in space, the distance between two points; Section formula, direction ratios and direction cosines, angle between two intersecting lines. Skew lines, the shortest distance between them and its equation. Equations of a line and a plane in different forms; the intersection of a line and a plane, coplanar lines, equation of a sphere, its centre and radius. Diameter form of the equation of a sphere.

Unit 14: Vector Algebra
Vectors and Scalars, the addition of vectors, components of a vector in two dimensions and three-dimensional space, scalar and vector products, scalar and vector triple product. Application of vectors to plane geometry.

Unit 15: Measures of Central Tendency and Dispersion
Calculation of Mean, median and mode of grouped and ungrouped data. Calculation of standard deviation, variance and mean deviation for grouped and ungrouped data.

Unit 16: Probability
Probability of an event, addition and multiplication theorems of probability and their application; Conditional probability; Bayes’ Theorem, the probability distribution of a random variate; Binomial and Poisson distributions and their properties.

Unit 17: Trigonometry
Trigonometrical identities and equations. Inverse trigonometric functions and their properties. Properties of triangles, including centroid, incentre, circum-centre and orthocenter, solution of triangles. Heights and Distances.

Syllabus for KIITEE  2021 that BTech (Lateral Entry) aspirants:

Mathematics:

Unit 1: Ordinary Differential Equation 
 The differential equation of first order. The linear differential equation of second order (homogeneous and nonhomogeneous case). Cauchy, Euler’s equation, Application of first-order differential equations (mixture problem, Newton’s law of cooling, orthogonal trajectory). Application to LCR circuits, Application to free and forced vibration of Mass spring system.

Unit 2: Series Method
Properties of power series, Radius of convergence of power series, Legender’s equation and Legender’s polynomial, properties of Legender’s polynomial, Gamma function, ordinary and singular point Frobenius method, Bessel’s equation and properties of Bessel’s function.

Unit 3: Laplace Transform
Laplace transforms of standard function, periodic functions, Unit step function, Transforms of derivatives and integrals. Differentiation and integration of transforms, Linearity property, Inverse Laplace transform, Shifting theorems, Convolution. Application to solve differential and integral equations (initial value problem).

Unit 4: Fourier Series
Periodic function, Fourier series, Euler’s formula, Even and odd functions, Fourier series expansions of even and odd function, Half range expansion of functions, Expansion of functions with finite discontinuities.

Unit 5: Matrix
Types of matrices, algebra of matrices, rank, solution of a non-homogenous system of equations, consistency of the system of equations, Linear dependence and independance, solution of a homogeneous system of equation. Eigen values and eigenvectors. Norm and inner product. Orthogonal and projection matrix. Application of eigen values and vectors to solve the system of the homogeneous linear differential equation.

Unit 6: Vectors
Vector algebra, the product of vectors, vector differentiation, vector differential operator, gradient, directional derivatives, divergence, curl, line integral, double integral, green’s theorem.

Engineering Mechanics:

Unit 1: Statics
Conditions of equilibrium, the concept of free body diagram, methods of moments and solution to engineering problems.
Friction: Static friction, ladder friction, problems with friction, Belt friction and screw jack, force analysis of plane trusses (method of joint, method of sections, plane frames, methods of members), Parallel forces in a plane, Centre of parallel forces, Pappus Guldinus theorems, MI of plane figures, parallel axis theorem, perpendicular axis theorem, Polar MI, Principle of virtual work for a single particle, rigid bodies, ideal systems and constrained bodies.

Unit 2: Dynamics
Force proportional to displacement, free vibration, D’ Alembert’s principle, momentum and impulse. Application to the principle of linear momentum to a single particle, rigid bodies and ideal systems. Application to the principle of angular momentum to a single particle and rotating rigid bodies. Principle of conservation of momentum.

Unit 3: Work and Energy
Principle of work and energy for an ideal system, Conservation of energy.

Basic Electrical Engineering:

 Unit 1: Electrostatics
Coulomb’s law, Electric charge, Potential, Field & Capacitance, Potential gradient due to spherical cylindrical and plane charges, Electric force, Flux density and sensitivity. Calculation of Capacitance of spherical, coaxial, cylindrical and parallel plate condenser. Energy stored in an electric field.

Unit 2: Electromagnetism
Magnetic field due to current in the conductor. Magnetic field intensity and Flux density. Permeability, B-H curves, Magnetisation, Concept in hysteresis. Magnetomotive force and Magnetic reluctance.
Electrodynamic force:- Faraday’s law of electromagnetic induction, Eddy current, emf induced in a conductor moving in a magnetic field. Energy stored in a magnetic field.

Unit 3: D.C. Circuit
Current distribution in series and parallel circuit. Power and energy in the electric circuit. Star-Delta conversion. Kirchoff's law & its application and solve electric circuit by branch & loop current method & nodal method. Superposition theorem.

Unit 4: A.C. Circuit
Production of alternating current – Instantaneous, average & RMS value of current and voltage. Peak factor, Form factor, Amplitude, Frequency, Phase difference, Addition and subtraction of alternating quantity. Phasor diagram, Resistance, Inductance, Capacitance, impedance and admittance- power and power factor-series and parallel circuits. Q factor-Three phase circuit. Star-Delta connection-Active and reactive power. Power measurement with one and two wattmeter methods-Calculation in RLC circuit, in the series circuit.

Unit 5: Instrument
Construction and principle of operationPMMC, MI and dynamometer type ammeter, voltmeter and dynamometer type wattmeter. Power factor meter.

Unit 6: Illumination
Law of illumination- Solid angle, Luminous flux, Luminous intensity, illumination brightness and luminous efficiency.

Unit 7: Production Light
Filament lamp, Arc lamp, Electric discharge lamps, Sodium vapour lamp, Mercury vapour lamp-Theory of electrical energy radiation. Comparison between filament lamp and fluorescent lamp. 
Energy bands in solids, conductors, insulators and semiconductors, PN junction, diodes, diode as rectifier, transistor action, transistor as an amplifier.

KIITEE 2022 Exam Pattern:

Kalinga Institute of Industrial Technology Entrance Examination 2022 (KIITEE 2022)  is the all-India entrance examination conducted by KIIT University, Bhubaneswar. The exam is a gateway to get admission into various UG & PG engineering and law courses which are conducted once in a year. it is a university-level exam. KIIT University offered various courses like  B.Tech., M.Tech., B.Arch., B.Sc., BCA, LLB, LLM, M.Sc., Mass Communication, MCA, MBA, Ph.D., etc.

Mode of KIITEE 2022 exam: the KIITEE is the online exam conduct by the KIIT University
Type of Question in KIITEE 2022: the KIITEE entrance question will be the MCQs type question having 4 option for each question
Languages of the exam: the KIITEE 2022 exam medium is English.
Marking Scheme: the Marking Scheme of KIITEE 2022 are as follows:

• Every correct answer carries 4 marks.
• There will be a deduction of 1 mark for each incorrect answer

Duration of exam: the KIITEE exam will be a 3 hours exam of 120 MCQs
 

Mark distribution in KIITEE 2022:
The KIITEE 2022 exam is having 120 MCQs in the 3 hours of total time duration. the syllabus of the KIITEE has contained the subject like Physics(40 MCQs), Chemistry(40 MCQs), and maths(MCQs). the mark distribution of the subjects are as followed- 

The graphical representation of the table is given below:

To know any exam pattern well candidates should knowledge of the KIITEE syllabus, KIITEE schedules are very important.

KIITEE 2022 Cut-Off:

KIITEE 2022, Kalinga Institute of Industrial Technology Entrance Examination is the all-India entrance examination conducted by KIIT University, Bhubaneswar. The exam is a gateway to get admission into various UG & PG engineering and law courses which are conducted once in a year. it is a university-level exam. KIIT University offered various courses like  B.Tech., M.Tech., B.Arch., B.Sc., BCA, LLB, LLM, M.Sc., Mass Communication, MCA, MBA, Ph.D., etc. The cutoff will be announced after the completion of the KIITEE Exam and declaration of the KIITEE Results. The counseling process will start after the declaration of  merit list which will be based on cut off Marks, Check Here, Counselling Admission Process 
The candidates from both national and International are applied for this exam. the cutoff gives an important idea to get admission in the KIIT college. There is no specific cut-off mark for KIITEE. The selection procedure totally depends upon some important factor like the no of applicants, no of vacant seats, Type of Question, Previous year cutoff, etc. the brief idea about the KIITEE 2022 cutoff is given below:

1. Difficulty Level of  Question in KIITEE MGT 2022:
the cut off depends on the Difficulty level of question. how much the question difficult thair will be chances of a low cutoff. if the level of question is low then the cutoff will be high.  

2. Previous year’s cutoff trends:
The cutoff also depends on the previous year cutoff marks. if the previous year's cutoff is high then this year's cutoff should be near that cutoff.

3. The number of candidates who appeared for KIITEE MGT 2022:
The number of candidates who appeared the exam is also a key factor of the cutoff. if the number of candidates is high then the cutoff will be also high. If the candidates are less then the cutoff also low.   

4. The total number of seats available for admissions:
one of the most important factors that give a huge impact on the cutoff is the number of seats available. if the availability of the seat is high then the cut-off will low or vice versa.

KIITEE Previous year (2021) cutoff:
Due to covid-19 in 2020, the exam was canceled. Here is the previous year's cut-off is given below in the table so that the candidates get easily get an idea about the KIITEE cutoff.

KIITEE 2022 Application Form:

KIITEE 2022, Kalinga Institute of Industrial Technology Entrance Examination is the All India Entrance Examination conducted by KIIT University, Bhubaneswar. The exam is a gateway to get admission into various UG & PG engineering and law courses which are conducted once in a year. it is a university-level exam. KIIT University offered various courses like  B.Tech., M.Tech., B.Arch., B.Sc., BCA, LLB, LLM, M.Sc., Mass Communication, MCA, MBA, Ph.D., etc. The candidates are requested to visit the KIITEE eligibility criteria before filling the form. Candidates are also requested to see the KIITEE Schedules, KIITEE Syllabus, and KIITEE counseling process before filling the Application form. 
The  KIITEE 2022 Application form is available online from 10th December 2021 to 29th January 2022. Interested candidates can fill the online application form by visiting the official website. Filling the KIITEE 2022 application form is mandatory to attend KIITEE 2022.  

Step to fill the application form of KIITEE 2022:
The Online application has released by the KIIT University. interested candidates can fill the Application form by the following steps:

1. Visit the official website of KIITEE 2022:
For the application form you must have to visit the official website of KIITEE. you will find all the information regarding the KIITEE 2022 there.

2. Click on the Apply Online:
After visiting the website of KIITEE you will find a link written as an admission tab on there. 

3. Select Course:
KIITEE Provides various courses like  B.Tech., M.Tech., B.Arch., B.Sc., BCA, LLB, LLM, M.Sc., Mass Communication, MCA, MBA, Ph.D., etc. The candidates have to choose the field of interest to study. the selecting of a subject should be my own choice rather than any pressure.

4. Fill in the details:
The candidates have to fill in all the necessary details in the application form some mention below-

5. Upload the documents: 
The candidates have to fill the documents

6. Check and submit:
After completing the details mentioned above check the all information thoroughly and carefully. when all information is given are correct then click in the submit button.

KIITEE 2022 Application Status:
For candidates who have filled in their KIITEE application form, the university has provided the facility to check their application status. Candidates will be able to check their KIITEE application status 2022 by providing their application number. This will allow them to know whether their application form has been taken into consideration or not. It is important that candidates check their application status before they proceed with the admission procedure. 

KIITEE 2022 Re-login:
Candidates can re-login to upload any of their documents that they have missed out on earlier. For this, candidates will have to provide their application number, gender, and date of birth. The KIITEE re-login facility is available to only those candidates whose application forms have been accepted by the university.  

KIITEE 2022 Application Number:
In case, candidates have lost their application number, they will have to provide their first name, middle name, and last name along with their gender and date of birth. After providing all the details, candidates will have to click on the proceed to find their KIITEE application number.

KIITEE 2022 Application Fee:
No application is charged for KIITEE 2022 application form.

KIITEE 2022 Slot Booking:
Slot booking is a necessary thing to get a seat for admission. Without the slot, the booking application form is nearly incomplete. The steps to slot booking are given below
Step 1: Visit the official website of KIITEE 2022
Step 2: Click on ‘ KIITEE Slot Booking 2022’
Step 3: On the login window, enter the application number and date of birth (as mentioned in the application form)
Step 4: After logging in, enter your preferred date and time slot for KIITEE 2022 test from the options available
Step 5: Cross-check the details and confirm your selection
Step 6: After booking KIITEE 2022 slots, you will be able to download KIITEE 2022 admit card
Step 7: Download and take printouts of the admit card for further reference

KIITEE 2022 Counseling:

The counseling session for KIITEE will be conducted after the declaration of the result. During the counseling session, the available seats are assigned to the students based on their merit list. The counseling process will be starting after the declaration of the results. The counseling process will be going to take place in two phases. The session stops when all of the seats got reserved. The full counselling schedule will be declared on the official website on the day of the declaration of the KIITEE 2022 result.

Requires Documents during counseling:

• Admit Card
• Rank Card
• 10th Pass Certificate
• 12th Marksheet and Pass Certificate
• The graduation mark sheet and pass certificate only for MCA, MSc(Biotechnology/ Applied Microbiology)
• Diploma Pass Certificate and three years Mark Sheet (for Lateral Entry Candidates)
• BTech/BE/ MCA/ MSc or Equivalent Degree Certificate (For MTech/LLM/PhD Candidates)
• Relevant Certificate issued by the Competent Authority, clearly indicating the Reservation Criteria claimed by the candidate.
• GATE Score Card (for MTech GATE Qualified only)
• School/College Leaving Certificate
• Conduct Certificate
• Demand Draft course fees and hostel fees in favor of KIIT, payable at Bhubaneswar. Cash payment will not be accepted. 

Counseling venue:
AUDITORIUM HALL CAMPUS – VI,
CONVENTION CENTRE KALINGA INSTITUTE OF INDUSTRIAL TECHNOLOGY(KIIT),
DEEMED TO BE UNIVERSITY, BHUBANESWAR - 24 ODISHA, INDIA
PH. – 0674 – 2742103, 2741747

Tentative dates for counseling:

KIITEE 2022 Result:

Kalinga Institute of Industrial Technology Entrance Examination 2022 (KIITEE 2022)  is the all India entrance examination conducted by KIIT University, Bhubaneswar. The exam is a gateway to get admission into various UG & PG engineering and law courses which are conducted once in a year. it is a university-level exam. KIIT University offered various courses like  B.Tech., M.Tech., B.Arch., B.Sc., BCA, LLB, LLM, M.Sc., Mass Communication, MCA, MBA, Ph.D., etc
 Candidates can download this by using their login credentials. The result will come on the basis of the performance of the candidates in the exam. It will become a rank card. according to that rank, the counselling process, as well as the seat allocation, will be declared.

Steps to download results:

Step.1: Go to the results portal:
After completing the results frequently visit the official website so you can find all the latest updates regarding KIITEE 2022. during the results day. the new result visiting link will be given by the KIITEE Law 2022. click on there to download the admit card.

Step.2: Enter the Login Id and Password:
Enter the Login Id and Password in the given respected place.

Step.3: The results card will be visible on the screen:
After successfully log in candidates' results card will be visible on the screen. study the results card carefully. if any information given in the results card about you is wrong the complaint to the authority. 

Step.4: Print out the results card:
Download the results card and make at least two print out of it. the results card will be further use during the counselling.  

The results of the KIITEE MGT contains:
The results of KIITEE MGT 2022 contains the following data of the given candidates. The information which will be present in the result is:

• Candidate's name
• Category
• Gender
• Date of birth
• Date & time of exam
• Overall and section-wise exam score

KIITEE 2022 Answer Key:

Kalinga Institute of Industrial Technology Entrance Examination 2022 (KIITEE 2022)  is the All India Entrance Examination conducted by KIIT University, Bhubaneswar. The exam is a gateway to get admission into various UG & PG engineering and KIITEE law courses which are conducted once in a year. it is a university-level exam. KIIT University offered various courses like  B.Tech., M.Tech., B.Arch., B.Sc., BCA, LLB, LLM, M.Sc., Mass Communication, MCA, MBA, Ph.D., etc. Some important dates of  KIITEE 2022.

Steps to download the answer key:
The answer key helps candidates to identify their weaknesses and strength. It also helps during the cut off and the counselling process. the steps to download the answer key are given below- 

Step.1: Go to the official website of KIIT:
To download the answer key candidates must visit the official website of the KIIT. after completing the exam the answer key will be available online in the official web site of the KIIT. to get the KIITEEE 2022 answer key you must first visit the official website of the KIIT. there you will find a link given for the download the answer key.

Step.2: Enter roll number and password:
 After visiting the official site and clicking on the give link its the time to give the registration id or roll number with the valid password. Which will be generated during the Application form of KIITEE 2022

Step.3: Download the answer key:
After successfully log in your Answer key will be visible on the screen. read the information in the answer key carefully and download it. after download make at least two hard copies of it because the answer key will be required during the counselling process.

KIITEE 2022 Eligibility:

KIITEE 2022, Kalinga Institute of Industrial Technology Entrance Examination is the All India Entrance Examination conducted by KIIT University, Bhubaneswar. The exam is a gateway to get admission into various UG & PG engineering and law courses which are conducted once in a year. it is a university-level exam. KIIT University offered various courses like  B.Tech., M.Tech., B.Arch., B.Sc., BCA, LLB, LLM, M.Sc., Mass Communication, MCA, MBA, Ph.D., etc. KIITEE allows students to study different courses at KIIT University, Bhubaneswar. The eligibility criteria vary as per the course. Here are the details to be eligible for different courses.

For UG Courses:

• Candidates applying for UG Courses must have passed 10+2 or its equivalent examinations with a minimum score of 60% marks.
• For engineering courses, the candidate must have Physics, Chemistry, and Mathematics as their subjects together in the previous class.

For PG Courses:

• Candidates applying for post-graduation courses must have graduated from a recognized university with a minimum score of 50% marks in the respective stream.
• There is not much age limit for many of the courses however some of the courses require an age barrier. In those cases, the candidate should have born on or after 01.07.1997.

KIITEE 2021 Eligibility Highlight:

KIITEE 2022 FAQs:

Q: How can I find my application number?
A: In case the candidate lost their application number, they have to provide their details (Name, Gender, DOB). After that, the candidate will have to click on proceed to find their KIITEE application number 2022.

Q: How to know the status of my application?
A: The candidates can check their KIITEE application status 2022 by providing their application number. On the official website, they have to click on the “APPLICATION STATUS” tab and enter their application no to get the status.

Q: Where can I find the detailed syllabus for the exam?
A: The syllabus for KIITEE 2022 will be prepared on the basis of 12th class syllabus. To know more about KIITEE 2022 Syllabus check out the syllabus section above.

Q: How many candidates appear KIITEE 2022 every year?
A: Around 1.5 lakh people appear for KITEE 2022 every year.

Q: What is the total number of questions and marks in KIITEE 2022?
A: There will be a total of 120 questions combined of 3 sections and 480 marks to finish within 3 hours. the details regarding this present on the Pattern of KIITEE 2022.

Q: How to download the admit card for KIITEE 2022?
A: The candidates can download their admit card through the official website of KIIT after the released date.

Q: Can I change the exam centre if I have submitted once?
A: No, you can not change the exam centre once you have selected one. Your 1st-time submission for exam centre is the final one.

Q: How can I download my counselling letter of KIITEE 2022?
A: Counselling letter will be issued at the official site of KIIT for the qualified candidates of KITEE 2022 exam.

Q: What are the courses present in KIIT that I can choose from if I qualify KIITEE exam?
A: You can choose from the following specializations if you qualify the KIITEE exam:

• ELECTRICAL ENGINEERING
• ELECTRICAL AND ELECTRONICS ENGINEERING
• COMPUTER SCIENCE ENGINEERING
• AEROSPACE ENGINEERING
• ELECTRONICS AND INSTRUMENTATION ENGINEERING
• MECHANICAL ENGINEERING
• CIVIL ENGINEERING
• INFORMATION TECHNOLOGY
• MECHATRONICS ENGINEERING
• AUTOMOBILE ENGINEERING
• ELECTRONICS & TELECOMMUNICATION ENGINEERING

Q: Is KIIT private or government college?
A:  Kalinga Institute of Industrial Technology (KIIT), a deemed to be university is a private college established in 2004 at Bhubaneswar, Odisha.

Q: What is the minimum rank to get selected in KIIT in the first round?
A: The minimum rank according to the previous year records for getting selected in the first round is approximately 2000.

Q: Is NCERT enough for KIITEE?
A: If you are strong in fundamentals and basics, then NCERT is enough. But if you want to more strong and confident before appearing the exam you can try other publications too.

Q: What are the best books to prepare for KIITEE?
A: Reference  books to read for KIITEE are:

• Calculus and analytic geometry by George B Thomas Jr and Ross L 
• Higher Algebra by Hall and Knight
• I.I.T Mathematics by M.L. Khanna, J.N Sharma, S.K.Pundir
• IIT Chemistry by Dr O.P. Aggarwal and Nirmal Singh
• NCERT Inorganic Chemistry
• Physics by H.C. Verma
• Organic Chemistry by Morrison & Boyd ·
• Comprehensive Mathematics by Mcgraw Hills Education